Color Palettes Free Sample
ISO 14001: 2004
ISO 9001: 2008

PML Series   Download PDF

Bright Brilliant Beautiful

A low temperature melting and dispersing, formaldehyde-free, polyamide based fluorescent colorants recommended for masterbatch and general purpose plastic use.

Customer Benefits – Made possible by Flamingo PML Series:

  • Easy to disperse at lio temperature starting from 130°C: Low temperature melting property of colorant.
  • Excellent brightness and color consistency: New proprietary polyamide based chemistry to deliver consistent bright-brilliant-beautiful colors
  • Faster processing and clean up: Excellent dispersion and flow along with substantially reduced plate out to ensure ease of processing and color change overs.
  • Higher pigment loading possible in masterbatches: Low melting property and ease of dispersion.
  • Better Thermal Stability: Wide processing range from 130°C to 280°C with minimal color change, including DIN EN 12877-2 Standard compliance up to 260°C

Available colors:

Colors Product code
Yellow PML-11
Green PML-12
Chrome PML-13
Orange PML-14
Red Orange PML-15
Red PML-16
Pink PML-17
Pink (R) PML-17
Magenta PML-18
Violet PML-19
Blue PML-20

Applications – Processes:

Suitable Limited Suitability
Masterbatch Liquid Colorants
Mouldings & Extrusions Vinyl Plastisols
Blow Mouldings Vinyl Calendared Film

Applications – Polymers:

Suitable Limited Suitability
LLDPE HIPS
LDPE Polycarbonate
HDPE Acetal
PP EVA & Rubber
GPPS Nylon 6
HIPS Cellulose Acetate
Acrylic

Typical Pigment Characteristics:

Properties Values
Average particle size 4-6¯
Melting point 95°C - 105°C
Decomposition Point** 290°C
Min, Processing Temp 130°C
Maximum recommended processing temperature (For short dwell times) < 280°C
Chemical Nature Formaldehyde free thermoplastic polyamide resin

Shelf & Storage Conditions:

  • Store at dry and closed conditions.
  • Keep away from source of ignition/sunlight.
  • Avoid moisture and raising dust.

Safety:

  • Please refer to our material safety Data Sheet.
  • **-maximum temp. at which fluorescence is maintained.
  • Color degradation is time/temperature dependent

PML pigments are a solid solution of thermoplastic polyamide resin with the fluorescent dyes.

Minimum processing temperature to ensure complete colour development is 130°C

Regulatory compliance:

  • REACH
  • AP 89(1)
  • TSCA
  • ROHS
  • ASTM D 4236
  • EN71-3, 2013

Please check with us for any regulatory requirement not already listed above

Other information:

PML fluorescent series are much brighter than conventional non-fluorescent colors.

Opacity can be improved, if necessary, by small additions of rutile titanium dioxide. The fluorescent color will become more pastel as the quantity of titanium dioxide is increased.

To obtain maximum color and brightness it is important to use sufficient pigment. The quantity used will depend upon the thickness of the plastic product.

PML series has excellent temperature stability. Due to the low melting point, optimum dispersion requires a low processing temperature of above 130°C only.

Disclaimer: Technical information, advice, statements, verbal and written suggestions and test results are offered for guidance only and it is believed to be reliable based on our present knowledge. There are not to be construed as a warranty for which we assume no responsibility. It is responsibility of the user to ensure their employee are aware of the content and also to ensure that any additional regulations are satisfied.
NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE MADE. Users are responsible for testing our products and suggestions to ensure that they are suitable for the intend purpose and application prior to use

Copyright © Aron Universal Limited
powered by MARS Web Solution