Thermoset type fluorescent pigments applicable for systems where solvent resistance is required. These are exclusively developed to meet Aerosol customer specific requirements like along shelf life of aerosol paint and uniform spray. These pigments have been pre approved through Duke University for the ACMI certification program in accordance with ASTM D-4236 and further these pigments are non-toxic and contain no constituent for heavy metal are in compliance with EN71, Part3, 2013 regulations.
|Yellow||IXT 3111LF||Red||IXT 3116LF|
|Green||IXT 3112LF||Pink||IXT 3117LF|
|Crome||IXT 3113LF||Magenta||IXT 3118LF|
|Orange||IXT 3114LF||Violet||IXT 3119LF|
|Red Orange||IXT 3115LF||Blue||IXT 3120LF|
|Bulk Density||0.35-0.40 gm/cc|
|Softening Point||165 - 175°C|
|Av. Particle Size||4-5 Microns|
|Thermal Stability||< 210°C|
|Oil Absorption Value||50-60 gm/100 gm of pigment|
|Solvent Resistance||V. Good|
Disclaimer: Technical information, advice, statements, verbal and written suggestions and test results are offered for guidance only and it is believed to be reliable based on our present knowledge. There are not to be construed as a warranty for which we assume no responsibility. It is responsibility of the user to ensure their employee are aware of the content and also to ensure that any additional regulations are satisfied.
NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE MADE. Users are responsible for testing our products and suggestions to ensure that they are suitable for the intend purpose and application prior to use