A formaldehyde-free, economical high-value performance, fluorescent colorants based on copolymer technology, Recommended for masterbatch manufacture and general purpose plastic use.
|Mouldings & Extrusions||Vinyl Plastisols|
|Blow Mouldings||Vinyl Calendared Film Powder Coatings|
|HIPS||EVA & Rubber|
|Acrylic||Nylon 6 Cellulose Acetate|
|Average particle size||4-6µ|
|Melting point||120°C - 130°C|
|Min, Processing Temp||160°C|
|Maximum recommended processing temperature (For short dwell times)||< 270°C|
|Chemical Nature||Formaldehyde free thermoplastic polyamide /polyester resin|
CP Pigments are a solid solution of hybrid co polymer resin with fluorescent dyes. Minimum processing temperature to ensure complete colour development is 160°C
CP fluorescent series are much brighter than conventional non-fluorescent colors.
Opacity can be improved, if necessary, by small additions of rutile titanium dioxide. The fluorescent color will become more pastel as the quantity of titanium dioxide is increased.
CP series offers limited light fastness on exterior exposure. To enhance lightfastness, optimal pigment loading & UV Stabilizers could be used.
To obtain maximum colour and brightness it is important to use sufficient pigment. The quantity used will depend upon the thickness of the plastic product.
Disclaimer: Technical information, advice, statements, verbal and written suggestions and test results are offered for guidance only and it is believed to be reliable based on our present knowledge. There are not to be construed as a warranty for which we assume no responsibility. It is responsibility of the user to ensure their employee are aware of the content and also to ensure that any additional regulations are satisfied.
NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE MADE. Users are responsible for testing our products and suggestions to ensure that they are suitable for the intend purpose and application prior to use